1. Instructions for use

Power-on and power-off:

Press the left hand power button, the baby simulates a person into a quiet normal state, and emits a "ah" sound, indicating that the boot is successful.

In the startup state, if you need to shut down, press the left hand power button again.

Mode selection:

Zhineng baby simulators have six modes: "normal", "hungry", "overstuffed", "wet urine", "fever", "fear".

In each mode, the baby simulators have specific behaviors and reactions to simulate the real baby state.

Nursing operations:

Feeding: Put the simulated bottle close to the baby's simulated human mouth, and the baby will make a feeding sound.

Change the diaper: Fix the matching diaper on the small buttocks of the baby simulators through the buckle on both sides of the waist, or remove the wet diaper.

Vital signs measurement: After holding the pulse key of the left hand for 5 seconds, the pulse frequency can be indicated by voice; Insert the analog thermometer into the anus for 10 seconds and pull it out, and the temperature value can be indicated by voice.

Communicating with the baby:

In normal mode, stroking the head or back of the baby simulates a corresponding sound response.

In a specific mode (such as hunger, wet urine, etc.), the infant simulant will make a cry, and at this time, it is necessary to judge the cause of the cry and carry out corresponding nursing operations.

2. Maintenance and maintenance

Battery replacement:

When the battery is low, press the mode button to prompt you to replace the battery. In this case, open the battery box on the back side and replace the battery according to the instructions.

Cleaning and maintenance:

Please treat the model like a real baby and do not use violence.

Use soft and absorbent cotton fabrics for cleaning and avoid harsh substances such as chemical cleaners or alcohol.

When cleaning, ensure that the power supply is turned off to avoid water damage to the circuit.

Note:

Avoid using ballpoint pens, ink, markers, etc. to mark the model, and do not use colored solvents such as iodine.

Do not use newspaper and other printed matter packaging model to prevent ink contamination.

Storage and Transportation:

Store the model in a dry, ventilated, dust-free environment when not in use.

When transporting, ensure that the model is turned off and avoid violent shocks and collisions.